In this situation, the only solution is to repair the MBR. Finally, click the "Apply" button to perform the MBR restoration. When Partition Wizard completes all operations, please quit from the program and boot from local hard disk again. These files are normally hidden and system protected, but they can become damaged, corrupted or deleted for a number of reasons.
As a result, you cannot start your computer, and then you will receive the "NTLDR is missing" error message. Here, if none of the solutions listed and described worked for you, it is safe to assume that the only thing that can resolve the "NTLDR is missing" error for you is a complete reinstallation of Windows. So, it is recommended to backup all needed data before reinstalling Windows.
Copy Disk feature provided by MiniTool Partition Wizard can help to copy all partitions and data from one disk to another in several steps, as showing in the following. Then, in the main interface of this professional tool, select the disk which needs copying and activate Copy Disk from the left action panel to clone MBR system disk to GPT.
Next, select the disk that will save the copy of the source disk as the target disk and then click "Next. The target disk should be large enough to hold all content on source disk, and you also need to backup all important data on this target disk in advance, because all its data will be deleted.
Next, choose a suitable copying method to decide the layout of the target disk and then click "Next" button. If you still receive the NTLDR is missing error after reinstalling Windows, you're most likely facing a hardware issue with your hard drive. In this situation, the only way you can do is to replace the damaged hard drive with a new one and then reinstall Windows. If the drive fails any physical tests as opposed to file system corruption , it needs to be replaced.
Of course, other components might be bad in your case. It was my opinion that you should start testing with the hard drive. I am not the wealthiest person and buying a new computer is at this time not an option I have. Thanks everyone for the help, and I hope you all have a great day.
Cheers, Your friend, Christopher. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question 8.
Report abuse. Details required :. Cancel Submit. I would start troubleshooting by testing the hard drive, which may have failed. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. In reply to Malkeleah's post on April 3, Thank you Malkeleah, I will try what you have said when I get back from work today : P.
Cheers, Christopher. In reply to Christopherx's post on April 3, I'll keep an eye on this thread. I followed your instructions and ended up with the "Accept" screen as shown in the tutorial. However at this screen my mouse would not work A standard corded USB mouse. Any ideas on how to continue? Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CD-ROM.
First verify that no floppy diskette or CD is in the computer, unless you are attempting to boot from a diskette. This error also occurs when a memory card is in a card reader. If you have any card reader or flash reader, make sure that no memory stick is inside the reader. If this error happens when booting from a floppy diskette, it doesn't have all the necessary files or is corrupt.
For example, if you're attempting to run the install from the CD-ROM, make sure it's the first device listed in the boot sequence. When you see this prompt, press any key on the keyboard immediately, such as the Enter or spacebar key. Verify the computer hard drive is properly set up in the BIOS setup. Improper settings can cause this error. Windows users.
0コメント